best vapes 2026

Geek Bar Pulse 2: What's Actually New Under the Hood

Geek Bar Pulse 2 Disposable Vape Banner

Geek Bar Pulse 2: What's Actually New Under the Hood

Geek Bar's Pulse line built its reputation on one core idea: two coils, two distinct vaping experiences, one device. The Pulse 2 keeps that dual-mode foundation and updates the hardware around it. Here's a breakdown of what's changed, in spec terms rather than marketing terms.

Geek Bar Pulse 2 4.35V High-Voltage Battery Device

Battery Tech: 4.35V High-Voltage (LiHV) Cell

While coil and wicking upgrades get standard coverage, one of the most critical mechanical shifts in the Pulse 2 is its power supply: a 4.35V LiHV (Lithium High Voltage) battery cell.

Most standard disposable vapes utilize standard 4.20V Li-ion cells. Upgrading to a 4.35V LiHV chemistry fundamentally changes how power is managed across the discharge cycle:

  • Minimizing Voltage Sag: Standard lithium cells experience a noticeable drop in output voltage as they drain, causing vapor output and temperature to drop when the battery is low. The higher peak voltage and flatter discharge curve of a 4.35V LiHV cell deliver stable wattage to the 0.8Ω coils even as the battery approaches 0%.

  • Higher Energy Density: The LiHV chemistry packs an upgraded 800mAh capacity into a compact footprint without adding unnecessary bulk to the device chassis.

  • Fast-Charging Performance: Built to tolerate higher charge currents, the cell works alongside the device's USB-C fast-charging protocol, enabling a 0% to 80% charge in roughly 15 to 20 minutes.

Geek Bar Pulse 2 Disposable Vape with battery stats

Two Modes, Two Puff Counts

The Pulse 2 retains the signature Regular/Pulse switch, but the two modes are now more clearly differentiated by output and longevity rather than just vibe.

Regular Mode — 25,000 puffs. A single coil fires, delivering a steadier, lower-intensity draw. This mode is built around duration: flavor is released gradually rather than all at once, which is reflected in the higher puff count.

Pulse Mode — 15,000 puffs. Both coils ignite simultaneously. This concentrates flavor delivery into a shorter window, trading total puff count for a more immediate, layered hit on each draw. The lower puff figure is a direct tradeoff of running dual coils at once rather than a single coil in sequence.

Users can switch between the two on demand, so the device functions as two puff-count profiles in one unit rather than a single fixed spec.

Coil Hardware: 0.8Ω Dual Mesh

The Pulse 2 uses a 0.8Ω dual mesh coil configuration. Dual mesh coils increase the surface area in contact with the e-liquid compared to a single mesh or standard coil, which is the mechanical basis for more consistent heating across the wick and more even vapor production per puff.

Geek Bar reports a 23.7% increase in e-liquid volume and improved output tied to this coil update — figures that come from the coil and wicking changes below, not from the mode-switching feature.

Geek Bar Pulse 2 Vape Specifications

Wicking: 30% Efficiency Increase

Alongside the coil update, Geek Bar cites a 30% improvement in wicking efficiency. In practical terms, wicking efficiency measures how effectively the cotton or wicking material draws e-liquid to the coil between puffs. Higher wicking efficiency reduces the risk of dry hits during rapid or back-to-back draws, since the coil is being resupplied with liquid faster.

VPU (Vapor Pickup Unit)

The Pulse 2 introduces what Geek Bar calls a VPU system, aimed at reducing residual e-liquid left unused at the bottom of the pod near end-of-life. Two figures are attached to this system:

  • 30% increase in e-liquid retention efficiency — more of the filled liquid is actually accessible to the coil over the device's life, rather than sitting unused.
  • 32% increase in effective puff output — a downstream result of that retention improvement, since less wasted liquid translates to more usable puffs from the same fill volume.

Together, these numbers describe an effort to get closer to the device's rated puff count in real-world use, rather than falling short due to trapped liquid.

Design

The Pulse 2 keeps the same pill-shaped silhouette Geek Bar has used across the Pulse line, with a see-through pod section that shows liquid level and coil assembly. The two coils sit visibly within the pod, which is functional as much as aesthetic — the dual mesh arrangement described above is part of what's visible through the shell.

The Short Version

Spec Figure
Regular Mode puff count 25,000
Pulse Mode puff count 15,000
Coil resistance 0.8Ω dual mesh
Wicking efficiency increase 30%
E-liquid volume increase 23.7%
E-liquid retention efficiency increase 30%
Effective puff output increase 32%

 

Vaping products are intended for adults 18+ (or the minimum legal age in your province). Age verification is required for all purchases, in-store and online. This product contains nicotine, which is addictive.

Reading next

Leave a comment

All comments are moderated before being published.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.